#Iphone connector repair software#
#Iphone connector repair professional#

If you use a wireless charger to power up your iPhone 8 or above, ensure that the case is compatible with wireless charging.

Read – ‘No Service’ on iPhone? Try These Quick Hacks Ensure that the Case Supports Wireless Charging You just need to make sure they are MFi certified and have the recommended 2.1 amps power capacity. While the original Apple charger can be too costly, there are several high-quality cables available online that are less expensive. If you can charge using another charger, that means your charger is at fault. Try using another cable/power adapter to charge your iPhone.

If your charger is MFi certified, ensure that both the lightning cable and power adapter aren’t damaged. If you are using a charger which is not Mfi (Made for iPhone/iPad/iPod) certified, you will frequently get a warning pop-up saying, “accessory may not be certified.” As part of security measures, iOS won’t let you charge the iOS device using the uncertified charger. While the market is flooded with chargers, not all of them are secure and certified to power iPhones. Check Your Lightning Cable and Power Adapter Be more careful while cleaning the port as the pins may get damaged and you will have to replace the charging port. Then, use a normal toothpick to remove the lint gently. To clean the port of your iPhone, you need to first shut it down. So, you should clean the port frequently to ensure it can remain clean. Believe it or not, debris tends to get stuck in the port and builds up over time to prevent iPhone from charging when plugged in. Well, the first thing you should do is check if the lightning port of your iPhone is blocked by gunk or small particles of lint.

Remove the Gunk out of Your iPhone’s Charging Port Thus, we are going to try out all the possible solutions that can help you resolve the iPhone not charging issue.

#Iphone connector repair software#

There can be issues with the charging adapter, a faulty software might be preventing the phone from charging or there can be an underlying hardware issue. For instance, the problem could be due to an uncertified charger or a rugged case that might not be supporting Qi-wireless charging or even a scrap of lint that may have sneaked into the charging port. Wondering why my iPhone is not charging? Well, there could be multiple culprits behind this annoying issue. What Could be the Reasons Behind the iPhone not Charging Issue? In this guide, we’ll take a look at everything that can cause the iPhone charging problem and eliminate possible reasons one at a time. There are several hacks you can try at your end to either get to the root of the issue or even solve it by yourself.Įven for a seemingly straightforward task like charging, there are several components involved that need to work properly. If you are facing this issue and thinking why my iPhone won’t charge, then there is no need to panic. One of those issues is the iPhone not charging one.

#Iphone connector repair professional#

In these cases, your troubleshooting may require a quick trip to the Genius Bar for some professional assistance.While iPhones are built with extreme precision and care, they are not immune to common issues.

If they persist, then you need to look closer at the condition of the cable (Is it frayed or kinked?) or the port itself (Did it ever get wet or damaged?). Once you've swabbed and vacuumed, your charging problems will likely disappear. Some other people report success with an electronics contact cleaner, though I would recommend trying the dry method first.

You also can use a small vacuum or some compressed air to remove dirt that is loosened by the swab, but doesn't fall out on its own. You can tap the phone on the edge of the table to remove any loose material that is not trapped by the bristles of the flosser. To clean the port, just insert the dry flosser and gently swap out the debris. Some people use tooth picks, but I found the GUM Soft flossers to work well as they are are rubbery and bend under pressure, lessening the chance you will damage your port during the cleaning process. The first thing you need to obtain is a thin, non-conductive probe that you can use to scrape the dust and debris out of the port. The lightning port is easy to clean as long as you careful and use the correct supplies.